Buscar

Catálogo

Facebook

UltraFire 3.6/3.7V Battery Charger

Cargadores

9,75 €

Código: A112362

Charges all 3.6/3.7V lithium batteries (such as 18650 and CR123A*)
Charge single or two batteries at a time
Two separate charging channels - batteries can be mix-charged
Auto-off when batteries are fully charged
UltraFire Model: WF-139

Item: UltraFire 3.6/3.7V Battery Charger
Power source
100V/220V auto AC switch

Compatible batteries
- 3.6V/3.7V CR123A*, 18650, 14500, CR2*, 18500, 17670, 17500 rechargeable batteries

* a spacer is required to charge CR123A/CR2

* Note: the horizontal contacts (the ones on the sides) are disabled by Ultrafire for unspecified reasons. kikkoman reported that these disabled contacts can be re-activated by modding the charger (connecting a few soldering points): http://img293.imageshack.us/img293/4606/dsc00081pi1.jpg. Upon re-activation these horizontal contacts can be used to charge CR123A batteries. You may still need to bend the contacts outward by a bit.

Output: 4.2V @ 450mA

Charging time
- 1 to 2 hours for CR123A batteries
- 2 to 4 hours for 18650 batteries

Length: 5.31 "
Height: 2.36 "
Width: 1.18 "
Weight: 7.58 oz

Length: 13.5 cm
Height: 6.0 cm
Width: 3.0 cm
Weight: 215 gram

Insert one or two 3.7V batteries to charge. Since the device has two isolated channels, you can simultaneously charge two batteries with different capacities.

* Note: although CR123A/CR2 batteries can be charged by this unit, a spacer is required to insert CR123A/CR2 batteries into the slots and this spacer is not included in this package.

An official ultrafire spacer will become available soon as an add-on. In the meantime, you may bend a paper clip to charge CR123A/CR2 batteries.

Precio:9,75 €