Specifications:

• Image Sensor: 1/3" SONY color CCD
• Horizontal Resolution: 420 TVL lines
• Minimum Illumination: 0.5LUX
• Sensing Area: 4.9 x 3.7mm/0.19 x 0.14in
• Signal System: PAL/NTSC
• S/N Ratio: More than 48db
• Shutter Speed: 1/50(1/60)~1/10000sec
• White Balance: Auto white balance
• Backlight Compensation: Auto backlight compensation
• Bullet-in-Lens: 4-9mm waterproof varifocal lens
• Video Out: 1.0Vp-p,75Ω, BNC
• Power Requirement: DC12V
• Power Consumption: 120mA
• Operating Temperature: -10℃ ~+50℃
• Install the wall bracket on the wall
• Fix the camera on the bracket
• Connect the BNC jack to video output of the monitor
• Connect the DC jack to 12VDC output of the power source
• When picture shown up on the monitor, adjust the camera to make the camera to the suitable position and lock the bracket by screw

Cautions:

• Please avoid placing or using the camera under direct sunlight. Rain and high humidity environment
• Please ensure that the input voltage range is within the specifications
• Please do not place the camera in a location within the a temperature exceeding 50℃
• Do not attempt to service the camera by yourself. Please refer all services to qualified dealers

Package Included:

• 1 x 1/3 Inch SONY Color CCD Camera  
• 1 x Instruction Manual
• 1 x Mounting Bracket